FIGURE 1-2Deactivating the AMC
Figure Legend
1Fully In (IN) When IN, the module communicates to the shelf manager that the module is not in the hot-swap state, and the shelf manager communicates with the MMC. This position is for normal operation.
2Half Way (HW) When in the HW position, the hot-swap sequence is initiated. The MMC sends a hot-swap event to the shelf manager.
Out (OUT) When OUT, the latching mechanism is released and the module can be extracted. Wait
3for the Hot-Swap LED to stop blinking before pulling the latch all the way out.
1-10Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010
