6.Carefully align the edges of the AMC with the guides in the appropriate site.

It might be helpful to look into the enclosure to verify correct alignment of the rails in the guides.

Caution – Do not force the AMC into the site. If it does not fit properly, check to ensure that you have the correct matching AMC for the switch.

7.Keeping the AMC aligned in the guides, slide it in by pressing on the AMC faceplate until the AMC faceplate is flush with the blade server faceplate.

1-16Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010

Page 26
Image 26
Sun Microsystems CP3000 manual