Sun Microsystems CP3000 manual AMC LEDs, 1AMC Status LEDs

1.5AMC LEDs

The following tables give status information for all of the LEDs on the AMC.

TABLE 1-1describes the LEDs defined by ATCA to monitor board status.

TABLE 1-1AMC Status LEDs

LED	Color	State	Description
Hot-swap	Blue	On	Management power is available to the AMC, and
			the AMC can safely be extracted.
		Off	The AMC is operational and is unsafe for
			extraction.
		Long blink	Delay before AMC is activated.
		Short blink	Delay before AMC is deactivated.
OOS	Red	Off	AMC is in service.
		On	Light is on when AMC is Out Of Service.
OK	Green	On	The AMC is booted and switching.
		Off	12V payload power is not detected.

TABLE 1-2describes in detail the different hot-swap BLUE LED states.

1-6Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010