Sun Microsystems CP3000 manual 3Threshold Sensors

3.4Sensors

The AMC.1-HDD SAS disk module management is connected to sensors monitoring key board voltages and temperatures. Data records from the following sensors are accessible using IPMI commands:

■Hot-swap

■+12V payload power

■+3.3V management power

■Board and inlet temperature

■+1.2V onboard voltage (generated from payload)

■+3.3V onboard voltage (generated from payload)

Note – The sensor index number is dynamically created by the shelf manager and might not always start at index zero (0).

TABLE 3-3Threshold Sensors

					Lower			Upper
					Thresholds		Non-	Thresholds		Non-
Sensor	Name	Type	Description	Units	Minor	Critical	recoverable	Minor	Critical	recoverable
0	Hot-	Hot-	Hot-swap	M	N/A	N/A	N/A	N/A	N/A	N/A
	swap	swap	sensor	states
1	+3.3V	Voltage	Voltage	Volts	3.162	3.105	3.005	3.462	3.505	3.605
	STBY
2	+1.2V	Voltage	Voltage	Volts	1.118	1.088	1.059	1.294	1.324	1.353
3	+12V	Voltage	Voltage	Volts	10.853	10.248	10.027	13.218	13.822	14.043
4	Board	Temp	Temp	Celsius	N/A	N/A	N/A	65.450	76.440	85.860
	temp
5	Inlet	Temp	Temp	Celsius	N/A	N/A	N/A	65	75	85
	temp

Chapter 3 Managing the AMC 3-5