Samsung DVD-V9800 instruction manual ENG-20

C O N N E C T I O N S

Connecting to an Audio System (Dolby digital, MPEG2 or DTS

Amplifier)

1

Using a Coaxial cable or an Optical cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) jack on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) or DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO or COMPONENT OUT jacks on the rear of the DVD-VCR to the VIDEO or COMPONENT IN jack of your TV as described on pages 14 to 18.

3

Turn on the DVD-VCR, TV, and Amplifier.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD-VCR.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Notes

Optical Cable	Coaxial Cable
(not included)	(not included)

Dolby digital or

DTS Amp.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)

-The jack position may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-20