Samsung DVD-V9800 instruction manual Connecting to a TV Interlace, ENG-17

C O N N E C T I O N S

Connecting to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio out or line out audio).

1

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD-VCR to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) jacks on the rear of the DVD-VCR to the AUDIO (red and white) IN jacks of your TV.

Turn on the DVD-VCR and TV.

3

With the unit in Stop mode, set the video output to Progressive Out in the Setup Menu. Then press ENTER and Component Interlace will be output. (See pages 55)

Notes

White		Blue
Red	Green	Red
Audio Cable		Component Cable
		(not included)
Red White Red	Blue	Green

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)

-The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

-The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) jack connected.

-You can hear sound from the LINE OUT AUDIO or AUDIO OUT (red and white) jacks with a Component connection. VCR audio only outputs through Line Out Audio jacks (Red,White).

ENG-17