Samsung DVD-VR325 Connecting HDMI/DVI to a TV, Method 1 Connecting to a TV with Hdmi Jack

Step 5 : Connecting

HDMI/DVI to a TV

If your TV has a HDMI/DVI input, connect HDMI/DVI cable to a TV. You will enjoy the best quality images and sounds.

• Method 1 : Connecting to a TV with HDMI Jack

• Method 2 : Connecting to a TV with DVI Jack

❚Method 1 : Connecting to a TV with

HDMI Jack

• Using the HDMI-HDMI cable connect the HDMI OUT
terminal on the rear of the DVD Recorder & VCR to the		To change HDMI output resolution, see page
HDMI IN terminal of your TV.	Note	30, 31.
• Press the input selector on your TV remote control until		HDMI (High Definition Multimedia Interface)
		HDMI is an interface to enable the digital trans-
the HDMI signal from the DVD Recorder & VCR
		mission of video and audio data with just a sin-
appears on your TV screen.
		gle connector.
		Using HDMI, the DVD Recorder & VCR trans-
		mits a digital video and audio signal and dis-
		plays a vivid picture on a TV having an HDMI
		input jack.
		HDMI connection description
		HDMI connector - Both uncompressed video
		data and digital audio data (LPCM or Bit
		Stream data).
		- Though the player uses a HDMI cable, the
		player outputs only a pure digital signal to
		the TV.
		- If TV does not support HDCP (High-band-
		width Digital content protection), snow noise
		appears on the screen.
		Why does Samsung use HDMI?
		Analog TVs require an analog video/audio sig-
		nal. However, when playing a DVD, the data
		transmitted to a TV is digital. Therefore either a
❚ Method 2 : Connecting to a TV with DVI Jack		digital-to-analog converter (in the DVD
		Recorder & VCR) or an analog-to-digital con-
• Using the HDMI-DVI cable (not included), connect the		verter (in the TV) is required. During this con-
		version, the picture quality is degraded due to
HDMI OUT terminal on the rear of the DVD Recorder &
		noise and signal loss. DVI technology is superi-
VCR to the DVI IN terminal of your TV.
		or because it requires no D/A conversion and is
• Using the audio cables, connect the AUDIO (red and
		a pure digital signal from the player to your TV.
white) OUT terminals on the rear of the DVD Recorder
		What is the HDCP?
& VCR to the AUDIO (red and white) IN terminals of
		HDCP (High-bandwidth Digital Content
your TV. Turn on the DVD player and TV.
		Protection) is a system for protecting DVD con-
• Press the input selector on your TV remote control until
		tent outputted via DVI from being copied. It pro-
the DVI signal from the DVD Recorder & VCR appears
		vides a secure digital link between a video
on your TV screen.
		source (PC, DVD. etc) and a display device
To watch HDMI/DVI output, set the digital		(TV, projector . etc). Content is encrypted at the
		source device to prevent unauthorized copies
CAUTION audio output to PCM. See page 29.		from being made.

Connections

English - 19