Samsung DVD-VR325 instruction manual Hdmi Resolution, Output selection, 3D Noise Reduction

❚ 3D Noise Reduction							Consult your TV User’s Manual to find out if
• Off : Normal						Note	your TV supports Progressive Scan.
							If Progressive Scan is supported, follow the TV
• On : Select to remove noise from the screen.
							User’s Manual regarding Progressive Scan
							settings in the TV’s menu system.
	This function depends on disc type. It may not
							If Video Output is set incorrectly, the screen
	work for some disc types.
Note							may be blocked.
	IRE: Short for the Institute of Radio Engineers. An
							The resolutions available for HDMI output
	IRE unit is a relative unit of measure equal-
	ing 1/140th of the peak-to peak (p-p) video						depend on the connected TV or projector.
	amplitude.						For details, see the user’s manual of your TV
							or projector.
❚ HDMI Resolution							When the resolution is changed it may take a
							few seconds for a normal image to appear.
This setting is used when the unit is connected by							If you set the HDMI output resolution 720p or
							1080i, HDMI output provides better picture
HDMI or DVI with Display devices (TV, projector, etc).
							quality.
							HDMI/DVI does not support 480i. Video with
	No Disc				Video
							480i resolution can only be viewed through the
	Setup	TV Aspect		: 16:9 Wide √
		Input Level		: Darker			analog outputs (Composite/S-Video/Component)
	Timer Rec.				√
		Black Level		: 7.5 IRE	√
		3D Noise Reduction : Off			√
		HDMI/DVI Resolution :480P480P			√
				720P	√
				: Mode A
				1080i
	MOVE	SELECT	RETURN		EXIT

•480p/576p : 720 x 480, 720 x 576

•720p : 1280 x 720

•1080i : 1920 x 1080

❚Output selection

•Connect the DVD-VR325 to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI.

•Press the P.SCAN button while the unit is in Stop mode to select the HDMI output resolution as follows: 480i → 480p → 720p → 1080i

System Setup

English - 31