Samsung DVD-VR325 instruction manual Pausing / Resuming, Concerning Copy Control Signals

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never. If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode and DVD-RAM.

	Copy-Free	Copy-Once	Copy-Never
DVD-RW(Ver.1.1)	O	-	-
DVD-RW(Ver.1.1)
with CPRM
VR mode	O	O*	-
V mode	O		-
DVD-R	O	-	-
DVD-RAM(Ver.2.0)	O	O*	-

Once “Copy Once” has been recorded, additional recording cannot be performed.

This * marked parts are compatible with CPRM.

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID.

During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

Recording the current channel you are watching

1.Check the antenna cable is connected.

2.Check the remaining time on the disc.

DVD-RAM/DVD-RW discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

Press the OPEN/CLOSE button and place a

1 recordable disc on the disc tray.

Press the OPEN/CLOSE button to close the disc

2 tray.

Wait until LOAD disappears from the front panel display.

3 Press the CH/TRK (/ ) buttons or number buttons to select the channel you want to record.

4 Press the REC SPEED button repeatedly, to select the recording speed (quality).

•XP (High, approx. 1 hour) ➝ SP (Standard, approx. 2 hours) ➝ LP (Low, approx. 4 hours) ➝ EP (Extended Play, approx. 6 hours/8hours)

RW VR XP CH 11

Recordable Time 02:08

5 Press the REC button.

•“ ” is displayed on the screen and recording begins.

6 Press the STOP button to stop or finish a recording in progress.

•The message “Updating the information of disc. Please wait for a moment” is displayed.

❚Pausing / Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch channels by pressing the CH/TRK (/ ) buttons while recording pauses.

You can not change the recording mode and

	the channel while recording.
Note
	Recording will stop automatically if there is no
	free space left for recording.
	Up to 99 titles can be recorded onto a disc.
	If the power interrupted due to power failure
	or other reasons, the title being recorded will
	not be saved onto the disc.
	Recording will stop automatically if a copy
	protected image is selected.
	Do not use DVD-R authoring discs with this
	unit.

Recording

English - 55