Samsung DVD-VR325 instruction manual Maximum Recording Time SP vs. SLP, Pausing/Resuming

Basic VCR Recording

Before starting

1.Check TV channel and Antenna connections.

2.Check the remaining time on the tape.

You can record a TV show in progress by inserting a blank tape and pressing the (REC) button. You can even add time in 30-minute increments up to 4 hours by pressing the (REC) button repeatedly.

Maximum Recording Time - SP vs. SLP

Tape Length	SP (Standard Play)	SLP (Super Long Play)
T-120	2 hrs	6 hrs
T-160	2hrs 40 mins	8 hrs
T-180	3 hrs	9 hrs

When you watch or record on the VCR during DVD Recording, some function buttons may not

Note	operate.
	The message “This function is not available.”
	will be displayed.

Note

Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape.

Warning: Do not cover this opening unless you are sure you want to record over the tape.

Press the (REC) button on the remote control or

4 front panel.

For options while recording is in progress, see

“Special Recording Features”. (see page 62)

Press the STOP button to stop or finish a record-

CAUTION

1 Insert a blank VHS tape into the VCR deck.

•Make sure the tape is long enough to record the entire program.

2 Press the 0–9buttons or the CH/TRK (/ ) buttons to select the desired channel.

Press the INPUT SEL. button to select AV1, AV2 or DV if recording from an external

device connected to the front or rear AV inputs, respectively.

3 Press the REC SPEED button on the remote con- trol to set the Record Speed to one of the following options:

•SP – Standard Play, for best picture quality.

•SLP – Super Long Play, for maximum recording time (3 times SP).

	The selected Record Speed will appear on the
Note	front panel display and on-screen display.

5 ing in progress.

❚Pausing/Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch channels by pressing the CH/TRK (/ ) buttons while recording pauses.

Check Remaining Time

1	Press INFO. button on the remote control.
	Following information will be displayed.
	(Current deck status, recording speed, remaining
	time, input channel, current time.)
		RAM	VCR
		STOP	STOP
		0:00:02	0:00:03
		EP	SLP
		Rem 06:07	Rem 05:41
		CH 10	CH 10
		Wed Jan 19. 2005	09 : 51 PM

Recording

English - 61