Samsung DVD-VR325 Channel Add/Delete, RF Output Channel, Memory, then press the Enter or √ button

4	Press the …† buttons to select Auto Channel
	Memory, then press the ENTER or √ button.
		No Disc		Auto Channel Memory
		Setup	Total channel numbers:		06/125
		Timer Rec.	Saved channel :	05
					5%
			Scanning...
			Stop
			SELECT	RETURN	EXIT

•The DVD Recorder & VCR will automatically search for all available channels in the selected tuner band. This procedure may take a few min- utes to complete.

•When finished, the lowest channel found will be displayed.

•Press ENTER button to stop or cancel scan- ning.

Channel Add/Delete

Use this feature if Auto Channel Memory missed a chan- nel that you would like to add and delete a channel you wish to remove.

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
	Press the …† buttons to select Channel Set, then
3 press the ENTER or √ button.
		No Disc				Channel Set
		Setup	Antenna/Cable TV		:	Cable TV	√
			Auto Channel Memory
		Timer Rec.					√
			Channel Add/Delete				√
			RF Output Channel		:	CH3	√
		MOVE	SELECT	RETURN		EXIT

4	Press the …† buttons to select Channel
	Add/Delete, then press the ENTER or √ button.
		No Disc		Channel Add/Delete
		Setup
		Timer Rec.
			Select channel :			1
			Add		Delete
		NUMBER	SELECT	RETURN			EXIT
	Press the …† or number buttons to select the
5 channels you want to add or delete on the Select
	channel screen. Then, press the ENTER button.
	• Using …† buttons for channel selection allows
	the user to add/delete one channel at a time.
	• Using CH/TRK ( /			) buttons for channel				System
	selection jumps to the next channel memorized
	in Auto Channel Memory.
								Setup
6 then press the ENTER button.
	Press the œ √ buttons to select Add or Delete,
		No Disc		Channel Add/Delete
		Setup
		Timer Rec.
			Select channel :			11
			Channel is added.
			Add	Delete
		NUMBER	SELECT	RETURN			EXIT

RF Output Channel

When you connect the DVD Recorder & VCR to TV with RF Antenna Cable, follow the steps below to set the RF Output Channel.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the ENTER or √ button.

English - 27