Samsung DVD-VR350/XEB, DVD-VR355/XEB, DVD-VR350/XEG manual Manual Setup

Manual Setup

PR		01
CH	◄	►
Name
Decoder		Off
MFT
System		L/L’
		Done
MOVE		OK

Manual Setup

If you have already set the stations automatically, you do not need to preset them manually.

1. With the unit in Stop mode/No Disc mode, press the MENU button.

2. Press the ▲▼ buttons to select Setup, then press the OK or ► button.

3. Press the ▲▼ buttons to select Install, then press the OK or ► button.

4. Press the ▲▼ buttons to select Manual Setup, then press the OK or

►button.

5. Press the ▲▼ buttons to select a PR (programme) you wish to edit, delete, or swap, then press the OK or ► button. Select Edit, Delete or Swap using the ▲▼ buttons, then press the OK or ► button.

•Edit : You can add or edit PR(programme). After change PR informations (CH, Name, Decoder, MFT, System), select Done, then press the OK button.

-CH : Tune the channel using ◄► buttons.

-Name : Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using ▲▼◄► buttons.

-Decoder : If you set on, you can record scrambled channels using external decoder box.

Before setting on, refer to connecting external decoder box in the page 16.

-MFT : You can tune up the channel frequency better using ◄► buttons.

-System : You can select broadcasting system of the receivable channel (B/G or L/L’)

•Delete : the channel information of selected PR(programme) will be removed.

•Swap : You can swap the channel information of two PR(programme). For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the OK button at PR5.

System Setup

English - 25