2. Press the
3. When you press the shutter button, the picture will be taken after the specified time has elapsed.
[Selecting the 10 SEC
Icon | Mode | Description |
| 10 Sec | Pressing the shutter button will allow an interval of |
| 10 seconds before the image is taken. | |
|
|
|
| 2 Sec | Pressing the shutter button will allow an interval of |
| 2 seconds before the image is taken. | |
|
| A picture will be taken after about 10 seconds and |
| Double | 2 seconds later a second picture will be taken. |
| When using the flash, the | |
| ||
| ||
|
| onds depending on the flash charging time. |
| Motion | The camera detects the subject's movement 6 |
| seconds after pressing the Shutter button, and the | |
| Timer | |
| picture is taken when the movement is stopped. | |
|
|
Ê Motion Timer
Motion | Icon & | |
Pressing the Shuter button after | Blink (1 second interval) | |
setting the Motion Timer | ||
| ||
Detecting the subject's movement | Blink (0.25 second interval) | |
No movement is detected | Turn on and the image is taken | |
after 2 seconds | ||
|
Selecting the Motion Timer à Pressing the Shutter button à Confirming the composition (Within 6 sec.)*1 à Starting the detection (Swing your hands fully)*2 à Stopping the detection
(Do not move) Ã Taking an image (after 2 sec.)*1: The camera detects the subject's movement 6 seconds after pressing the Shtter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.beyond the center part (50%) of the sensor where the movement is recognized.
åIf the camera doesn't sense anymovement for 30 seconds, or the camera doesn’t sense stillness after sensing movement.
The detection range of
Motion Timer
036