14 www.electrolux.com

CLOCK FUNCTIONS

SYM- FUNCTION

DESCRIPTION

BOL

 

TIME OF DAY

To show the time of day. To change the time of day, re-

 

fer to 'Setting the time of day'.

DURATION

To set how long the appliance operates.

 

 

END

To set when the appliance deactivates. You can use Du-

 

ration and End at the same time (Time delay) if you want

 

the appliance to activate and deactivate automatically

 

later.

 

 

COUNT UP TIMER

Use the Count Up Timer to monitor how long the appliance operates. It starts to count when the appliance starts to heat. Reset the Count Up Timer: Touch and at the same time until the display shows "00:00" and the Count Up Timer starts to count up again.

You cannot use Count Up Timer when Duration or End is set.

SETTING THE DURATION

1.Activate the appliance and set a heat- ing function and temperature.

2.Touch again and again until the dis- play shows .

flashes in the display.

3.Touch or to set the minutes for

DURATION.

4.Touch to confirm.

5.Touch or to set the hours for

DURATION.

If you touch while you set the hours for DURATION, the appli- ance goes to the END function set- ting.

6.When the set time ends, an acoustic signal sounds for two minutes.

and the time setting flash in the dis- play. The appliance deactivates.

Touch a sensor field to stop the acous- tic signal.

7.Deactivate the appliance.

SETTING THE END

1.Activate the appliance and set a heat- ing function and temperature.

2.Touch again and again until the dis- play shows .

flashes in the display.

3.Touch or to set END (first you set the minutes and then the hours)

and to confirm.

4.When the set time ends, an acoustic signal sounds for two minutes.

and the time setting flash in the dis- play. The appliance deactivates.

5.Touch a sensor field to stop the acous- tic signal.

6.Deactivate the appliance.

SETTING THE MINUTE MINDER

Use the MINUTE MINDER to set a count- down (maximum h min). This function has no effect on the operation of the appliance. You can set the MINUTE MINDER at any time and also when the appliance is off.

1.Touch .

and "00" flash in the display.

2.Use or to set the MINUTE MINDER. First you set the seconds and then minutes and hours.

3.Touch and at the same time to reset the set time.

4.Touch or the MINUTE MINDER starts automatically after five seconds.

5.When set time ends, an acoustic signal sounds for two minutes. "00:00" and flash in the display.

Page 14
Image 14
Electrolux EBGL70 Clock Functions, Count UP Timer, Setting the Duration, Setting the END, Setting the Minute Minder