Installing the shelf supports

ENGLISH 23

2.Lightly move the support on the front catch inwards.

3.Pull the support out of the rear catch.

Install the shelf supports in the opposite se- quence.

Cleaning the water drawer and the steam generator:

1.Put the water and vinegar mixture (ap- proximately 250 ml) through the wa- ter drawer into the steam generator.

STEAM GENERATION SYSTEM

CAUTION!

Dry the steam generator after each use. Soak up water with the sponge.

Remove the limescale residue with water and vinegar.

CAUTION!

Chemical de-scaling agents can cause damage to the enamel. Fol- low the instructions of the manu- facturer.

Wait for approximately 10 minutes.

2.Remove the water and vinegar with the sponge.

3.Put clean water (100 - 200 ml) into the water drawer to flush the steam gener- ation system.

4.Remove water from the steam genera- tor with the sponge and rub dry.

5.Keep the door open to let the appli- ance dry fully.

CLEANING THE DOOR

To clean the door remove it.

Page 23

Image 23

Electrolux EBGL70 user manual Installing the shelf supports, Steam Generation System, Cleaning the Door

Contents

EBGL70 EN Oven WE’RE Thinking of YOU ContentsCustomer Care and Service Risk of suffocation, injury or perma- nent disability Safety InformationInstallation Electrical connection Internal Light Care and CleaningUSE Steam Cooking Disposal Baking tray AccessoriesWire shelf Product Description To measure how far the food is cooked Core temperature sensor First Connection to Mains Initial Cleaning PreheatingFirst Setting the Time DAY Before First USE Function Description Field Control PanelElectronic Programmer Display Other Indicators of DisplayHEAT-UP Indicator You can examine or change the temperature Heating function Application Daily USE Fast Heat UP Function Setting the Heating FunctionChanging Temperature Checking the Temperature English Setting the Minute Minder Count UP TimerSetting the Duration Setting the END Setting the Time Delay Function Automatic Recipes Automatic Programmes With Weight InputSetting an automatic recipe Automatic Programmes You can set the core temperature Using the AccessoriesCore Temperature Sensor There are two temperatures to set To increase safety. Always make sure Inserting the AccessoriesTouch again and again to see three other temperatures All accessories have small indentations English Control Lock Settings MenuAdditional Functions MY Favourite Programme Function Cooling FAN Automatic SWITCH-OFFOven temperature Switch-off time Brightness of the Display Removing the shelf support Care and CleaningSteam Cleaning Shelf Supports Steam Generation System Installing the shelf supportsCleaning the Door Cleaning the water drawer and the steam generator Lamp What to do IF… Problem Possible cause Solution Serial number S.N = appliance = recess InstallationInstalling the Oven To lift the appliance, do not use the door handle Min Installing the Oven Under a Work SurfaceElectrical Connection Electrical Connection with the HOB Connection Diagram 400 Servicestellen Points de Service Servizio dopo Vendita CH GARANTIE, GARANZIA, Guarantee Environment Concerns 892934989-B-482011

Electrolux EBGL70 Installing the shelf supports, Steam Generation System, Cleaning the Door

Models: EBGL70

ENGLISH 23