ENGLISH 29
D |
E |
F |
Only a qualified person can con- nect the appliance to the electricity supply.
1.Open the mains terminal cover (D).
2.Put the connection cable into the sup- plied rings (E). This is to prevent the cable from rubbing against the drawer. The connection cable is on the housing side.
3.Install the cable grip (F).
4.Connect the terminal as in the illustra- tion.
5.Put the cable into the strain relief clamp.
6.Close the mains terminal cover.
CONNECTION DIAGRAM 400 V
400V 3~ | 400V 2~ | ||||
|
| 400V |
| 400V |
|
PE L1 L2 L3 | PE L1 |
| L2 | ||
1 | 2 | 3 | 1 | 2 | 3 |
| 5 | 4 |
| 5 | 4 |
Phase definitions: L1, L2, L3 (or R, S,T)
WARNING!
If service is required always discon- nect the appliance from the power supply.
ELECTRICAL CONNECTION WITH THE HOB
You can connect the oven to an independ- ent hob from the current range of Electro- lux and AEG hobs. You can purchase the necessary connection cable separately:
• AK - EB/GKTC (S) 1 m for ceramic hobs.
• AK - EB/GKTCi (S) 1 m for induction hobs.
The hob connection socket is at the top of the oven cabinet.
