Voice memo
You can add your voice to a stored still image.
How to add a voice to a still image
1.Select an image that you wish to add sound to by pressing the Left/ Right button.
2. Select the [ ] menu by pressing the Menu button and press the Right button.
3.Select the [Voice Memo] menu by pressing the Up/ Down button and press the Right button.
4.Select the [On] menu by pressing the Up/ Down button and press the OK button.
5.The camera is now ready to record a voice memo.
|
|
|
|
|
|
|
|
|
|
|
|
|
| Slide Show |
|
|
|
|
| Protect |
|
|
|
|
| Delete |
|
|
|
|
| Voice Memo |
| On |
|
|
| Resize |
| Off |
|
|
| Rotate |
|
|
|
|
| DPOF/Standard |
|
|
|
|
|
| Set:OK |
| |
|
|
|
|
| |
|
|
|
|
|
|
Start:SHUTTER
6.Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside.
7.The recording can be stopped by pressing the shutter
button again. | Stop:SHUTTER |
8.The ( 
) icon will be displayed on the LCD by pressing the Display/ Information button after voice
memo recording has finished.
-Voice memos can’t be recorded onto movie clip files.
-A distance of 40cm between you and the camera (microphone) is the best distance to record sound.
-The voice memo will be saved in *.wav format, but has the same file name as the still image to which it corresponds.
-If you add a new voice memo to the still image that already has a voice memo, the existing voice memo will be erased.
100