Instructions

Use this camera in the following order

Set up the

camera driver

Take a picture

Insert the

USB cable

Check the

camera’s power

Check

[Removable Disk]

Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.138)

To play back the movie clip on a PC, DirectX 9.0 or later must be installed. (p.138)

Take a picture. (p.29)

Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.144)

Check the camera’s power. If the power is turned off, press the camera button to turn it on.

Open Window’s EXPLORER and search for [Removable Disk]. (p.145)

If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer holds no responsibility for loss or damage of images on the memory card due to the use of a card reader.

2