Selecting Video out type

The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

How to set the video out type

1.Press the Menu button and select the [ ] menu tab.

2.Press the Right button and select the [Video Out] menu by pressing the Up/ Down button.

3.Press the Right button and select a desired LCD by pressing the Up/ Down button.

-[Video Out] sub menu : NTSC, PAL

4.Press the OK button to set the setting.

Connecting to an external monitor

In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the AV cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.

Imprint

 

Sound

 

Brightness

 

Video Out

NTSC

Quick View

PAL

Auto Rotating

 

USB

 

Yellow Colour-Video

White Colour-Voice (Stereo)

INFORMATION

NTSC

: U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.

PAL

: Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,

 

Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,

 

Thailand, Norway.

When using a TV as an external monitor, you will need to select the external or AV channel of the TV.

There will be a digital noise on the external monitor, but it is not a malfunction. If the image is not in the centre of the screen, use the TV controls to centre it.

When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD.

121