Recording mode
How to use the MySET mode ( 
)
This mode allows users to save frequently used shooting settings for later use.
Steps 1~2 are the same as those for AUTO mode.
3. Select the MySET mode by rotating the mode dial.
4. Press the menu button and select the [ 
] menu tab.
5. Press the Right button and select the [Load Myset] menu by pressing the Up/ Down button.
6.Press the Right button and select a desired MySET number by pressing the Up/ Down button.
7.Press the OK button and a confirmation window will
display. Select the [Yes] menu and press the OK button to load the camera configuration saved in the MySET number and close the menu screen.
8. Point the camera towards the subject and compose the image by using the LCD.
9.Press the shutter button to capture an image.
Please see page 78 for details of the MySET shooting mode and menus.
How to use the MOVIE CLIP mode ( 
)
A movie clip can be recorded for as long as the available recording time of the memory capacity allows.
(A movie clip sets as 640X480 movie size and 25fps frame rate can be taken up to 30 seconds.)
Steps 1~2 are the same as those for AUTO mode.
3. Select the MOVIE CLIP mode by rotating the mode dial.
4. The MOVIE CLIP mode icon and available recording time will display on the LCD.
5.Point the camera towards the subject and compose the image by using the LCD. Press the shutter button and movie clips are recorded for as long as the available recording time. Movie clips will still be recorded if the
shutter button is released. If you wish to stop recording, | [ MOVIE CLIP mode ] |
press the shutter button again. |
*Image size and type are listed below.
-Image size : 640X480, 320X240, 160X120(Selectable)
-File type : *.avi(MJPEG)
32