Samsung GH68-23718A Select Change Lock, New Lock Code prompt appears in the display, Emergency #

Note: The default lock code is the last four digits of your mobile phone number.

3.Select Change Lock.

The “New Lock Code” prompt appears in the display.

4.Enter the New Lock Code. You’re prompted to re-enter the New Lock Code for verification.

5.Enter the new lock code again. Your changes are stored.

Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the lock code, be sure to write down or memorize the new code.

Emergency #

You have the option of storing up to three emergency numbers to your phone. Each number can be up to 32 digits in length. All emergency numbers can be dialed any time, even when your phone is locked or restricted.

Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call.

Important!: Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calling may not be available on all wireless networks at all times.

Important!: DO NOT depend on this phone as a primary method of calling 911 or for essential or emergency calls.

Remember to always turn your phone on and check for adequate signal strength before placing a call.

Note: When you dial an emergency number, you phone locks itself to the emergency location that answered the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency number.

Store Emergency Numbers

1.From the Settings menu, select Phone Settings ➔ Security.

The “Enter Code” prompt appears in the display.

2.Enter the four-digit lock code using the keypad.

Note: The default lock code is the last four digits of your mobile phone number.

123