25
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
•
If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
•
If the caller cannot be identified,
Call from unavailable #
,
Call from
restricted #
, or no number appears in the display.
Tip:
Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (See
“Assigning a Picture to a Contacts Entry” on page 43).
The phone continues to notify you of the call until one of the
following events occur:
•
You answer the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
•
Eight ring volume settings:
Ringer Off
,
Vibrate
,
Low
,
Low/Medium
,
Medium
,
Medium/High
,
High
, or
Vibrate/High
.
•
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
•
Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored to a call log.
Set Call Ringer Volume
1. In standby mode, press the Volume key on the left side of
the phone.
2. Press the Volume key up or down to set the call ringer
volume as desired.
3. Once you’re satisfied with the setting, press or .
The phone returns to standby mode.
Tip:
You can also enter the
Volume
> Voice Calls sub-menu from standby
mode by pressing the
Menu
soft key, then selecting
Settings
➔
Sound
Settings
➔
Volume
➔
Voice Calls
. Use the Volume key on the right side
of your phone to adjust the ringer volume setting.
r560.book Page 25 Tuesday, June 16, 2009 1:04 PM