23
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press the number key representing the second digit of the
desired Contact’s speed dial number.
3. Press and hold the number key representing the third digit
of the desired Contact’s speed dial number.
Example:
To speed dial the Contacts entry assigned to speed dial 325, press
or , press or , then press and hold or
.
Voice Dialing
The voice recognition capabilities of your Samsung Messager II
are exceptional due to advanced, speaker-independent
technology. This means you do not need to “train” your phone to
understand your voice. You can use your voice in a natural
manner to dial numbers.
Note:
End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. See “Voice SVC”
on page 70 for more information.
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
•
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold or .
“Say a command” appears in the display and is
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
r560.book Page 23 Tuesday, June 16, 2009 1:04 PM