ŝ141Ş
Setting the Exposure
ƈSet Exposure Setting Steps in [Expsr Setting Steps] in
[ACustom Setting] to increments of 1/2 EV or 1/3 EV.
Changing the Exposure Setting Steps
ƈAE Lock is a function that memorizes the exposure prior to taking the picture. Use this when the
subject is too small or backlit and a proper exposure setting cannot be obtained.
1. Press the button.
- The camera memorizes the exposure (brightness) at that
instant.
Press it again to unlock.
Recording the Exposure Before Shooting (AE Lock)
ƃis displayed in the viewfinder while the AE lock is engaged. (p.18)
ƃThe exposure remains in memory for twice as much time as the metering timer after releasing the
button. The exposure remains locked as long as the button is kept pressed or the
shutter release button is kept pressed halfway.
ƃYou will hear a beep when the button is pressed. The beep can be turned off. (p.161)
ƃAE lock is not available when the exposure mode is (Manual) or (Bulb) mode.
ƃThe combination of shutter speed and aperture value changes depending on the zooming
position even while the AE lock is engaged when using a zoom lens for which maximum aperture
varies depending on the focal length. However, the exposure value does not change and the
picture is taken at the brightness level set by the AE lock.
ƃIf the exposure mode is (Manual), the aperture and/or shutter speed are automatically
adjusted to set the appropriate exposure when the button is pressed. (p.137)
ƃExposure can be fixed when focus is locked. Set in [AE-L with AF locked] in the [ Custom
Setting] menu. (p.124)
INFORMATION
Expsr Setting Steps
1/2 EV Steps
1/3 EV Steps
Exposure setting steps
are set to 1/2 EV