Main
Important Warranty Information Regarding Television Format Viewing
C
Chapter 1: Your New TV
Chapter 2: Installation
Chapter 3: TV Operation
C
Chapter 3: TV Operation
List of Features
Chapter One
Accessories
Familiarizing Yourself with Your New TV
Control Buttons
Page
Connection Jacks (Rear)
Page
Page
Connecting VHF and UHF Antennas
Chapter Two
Antennas with 300-ohm Flat Twin Leads
Antennas with 75-ohm Round Leads
Separate VHF and UHF Antennas
Connecting Cable TV
If you want to connect cable, and you do not need to use a cable box:
Page
Connecting a VCR
Also, you can connect to AV 3 on the side panel of TV.
Connecting a Second VCR to Record from the TV
Connecting a DVD Player
Also, you can connect to AV 3 on the side panel of TV.
Connecting to Regular Audio and Video Jacks
Connecting a Digital TV Set-Top Box
Page
Connecting a Camcorder
Connecting to the Digital Audio Input
Installing Batteries in the Remote Control
Connecting Additional Speakers
The rear panel jacks on your TV make it easy to take advantage of the surround sound system.
Turning the TV On and Off
Chapter Three
Plug & Play Feature
Plug & Play feature doesnt work when the V-Chip is activated or when in the A/V mode.
For details, see page 27.
For details, see page 52.
Viewing the Menus and On-Screen Displays
Selecting a Menu Language
Selecting the Antenna Input
You can connect two different signal sources by choosing the antenna input (Ant.1 or Ant.2).
Adjusting the Screen Automatically (Self Focus)
Deactivating the Automatic Execution of the Self Focus
Removing the Self Focus Message from the Display
Memorizing the Channels
Storing Channels in Memory Automatically
Changing Channels
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
To Store Your Favorite Channels:
Selecting Your Favorite Channels
Only memorized channels can be set as Favorite channels.
To View Your Favorite Channels:
Labeling the Channels
If you add or delete the TV channel, the labeled channels list will also be added or deleted.
Scanning the Channels
The TV automatically scan all of the channels it has memorized.
When the ANT 2 IN mode is selected, the channel scan function works on the main picture only.
Fine Tuning Channels
Using Automatic Picture Settings
Customizing the Picture
Selecting the Color Tone
Changing the Picture Size
Digital Noise Reduction
Viewing Picture-In-Picture
Activating the PIP
Page
Changing the Location of the Sub picture
Selecting a Signal Source for the Sub picture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
Freezing the Picture
Using the MUTE Button
At any time, you can temporarily cut off the sound by using the MUTE button.
Adjusting the Volume
Using Automatic Sound Settings
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
Choosing a Multi-Channel Sound (MTS) track
Auto Volume
Setting the Dolby Digital
Converts and outputs mono and stereo audio signals into a 5.1 channel surround sound audio signal.
Setting the Dynamic Range
This function only works when Dolby Digital is activated.
Adjusting Speaker Levels
The Test Tone for the sub woofer is very low frequency. This is normal, not a malfunction.
Adjusting the Time Delay for Surround Sound Speakers
Selecting a Digital Audio Source
Setting the Clock Manually
Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
continued...
Certain broadcasts may not transmit the correct time. In this case, set the time manually.
Page
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
Setting the On/Off Timer
Setting the Blue Screen Mode
Viewing Closed Caption Information
The Caption function doesnt operate when the PIP is active.
Setting the On/Off Melody
A melody sound can be set to come on when the TV is powered On or Off.
Using the V-Chip (USA)
How to Change Your Password
How to Enable/Disable the Rating Controls
Page
How to Set up Restrictions Using the MPAA Rating
Explanation of the MPAA and TV (FCC) Rating Systems:
Viewing an External Signal Source
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 66
Press the or button to select Edit Name, then press the ENTER button.
Press the MENUbutton. Press the ENTERbutton to select Input.
Assigning Names to External Sources
This feature enables you to name the input source you have connected.
Customizing Your Remote Control
Page
Chapter Four
Page
Using the Search and Skip Functions
Using the Play Function
When Playing a MP3/WMA
Page
When Playing a MPG
When Playing a JPEG
If you want to return to the file list, press the (Stop) button.
Using the Disc Menu
Using the Title Menu
Displaying the Disc Information
Using the Zoom Function (DVD/VCD)
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Using the Bookmark Function (DVD/VCD)
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Depending on the disc, this function may not work.
Program Play (CD)
Setting up the Language for Player Menu
Setting up the Display Options
Setting up the Parental Control
If you have lost your password, enter the master password (1369).
To cancel the rating level, select No in the Use Password by pressing the button.
T
Chapter Five
Identifying Problems
T
A
Cleaning and Maintaining Your TV
Using Your TV in Another Country
Specifications
