Your New Wide TV
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your
1. POWER
Turns the TV on and off.
2. S.MODE
Adjust the TV sound by selecting one of the preset factory settings. (or select your personal, customized sound settings.)
3. P.MODE
Adjust the TV picture by selecting one of the preset factory settings. (or select your personal, customized picture settings.)
4. +100
17. ▲, ▼, œ, √, ENTER
Press to select highlight up, down, left, or right. While using the
18.MTS (Multichannel Television Stereo)
Press to choose Stereo, Mono or SAP (Secondary Audio Program).
19. SRS
Activates TruSurround.
20. ADD/DEL
Press to select cable channels over 100 on TV.
5. VOL +, VOL -
Press to increase or decrease the volume.
6. MUTE
Press to mute the TV sound.
7. Anynet
Runs the Anynet view functions and sets up the
Anynet devices.
8. MENU
Displays the main
9. STILL
Press to stop the action during a particular scene. Press again to resume normal video.
10. P.SIZE
Press to change the picture size.
11. MODE
Selects a target device to be controlled by the
Samsung remote control (i.e., TV, STB, VCR,
CABLE, or DVD).
12.
Tunes to the previous channel.
13. SOURCE
Press to display all of the available video sources (i.e., TV,
14. CH, CH
Press to change channels.
15. INFO
Press to display information on the TV screen.
16. EXIT
Press to exit the menu.
English - 12
Press to add or erase channels in the TV’s memory.
Use the ADD/DEL button to memorize and erase the fine tuning after fine tuning channels.
21. SLEEP
Press to select a preset time interval for automatic shutoff.
22. PIP (Picture In Picture)
Activates PIP.
23. FAV.CH (Favorite Channel)
Press to switch between your favorite channels.
24. SET
Used during set up of this remote control, so that it will work compatibly with other devices
25.DNIe (Digital Natural Image engine)
Activates DNIe.
26. PIP Controls
SWAP; Press to exchange the video signal that is currently displayed on the main screen with the signal in the PIP window.
CH/; Press to display the available channels in sequence. (These buttons change channels in the PIP window only.)
27. VCR/DVD Controls
Controls VCR or DVD functions: Rewind, Stop, Play/Pause, Fast Forward.
28. RESET
If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds.