• For replacement, you will need a 5.91
Unplug TV, then use a screwdriver
1 to remove the screw as shown in the picture.
(Remove the rubber cap and unscrew the screw. )
Remove the Lamp cover.
2 (Exert a bit of force to the right and pull for easy opening.)
Use a screwdriver to remove the
3 screws securing the Lamp. There are 2 screws: one on the left and one on the right. When the screws have been completely unfastened, they will still be connected to the body of the Lamp.
Separate the Lamp from the
4 engine by holding the handle and pulling it out.
To reinstall the Lamp, follow these
5 steps in reverse order.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws.
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).
English - 7 
