Samsung HL-P4674W Memorizing the Channels, Selecting the Video Signal Source, O p e r a t i o n

O p e r a t i o n

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual).

Selecting the Video Signal Source

Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.

Input

Picture

Sound

Channel

Setup

Channel

Antenna	: Ant.1	√
Air/CATV	: Air	√
Auto Program		√
Add/Delete		√
Favorite Channels		√
Name		√
Fine Tune		√
▼ More
Move	Enter	Return

2 Press the … or † button to select “Air/CATV”, then press the ENTER button.

If you are connected to an antenna, press the … or † button to select “Air”.

If you connected cable, press the … or † button to select the type of cable system: “STD”, “HRC” or “IRC”.

Press the EXIT button to exit.

	Channel
Input	Antenna	Air
	Air/CATV	STD
Picture	Auto Program	HRC
		IRC
	Add/Delete
Sound	Favorite Channels
	Name
Channel	Fine Tune
Setup	▼ More

Move Enter Return

NOTES

•“STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.

•Subscription cable services require service-specific requirement for viewing.

English - 28