Samsung HL-R5678W, HL-R6178W, HL-R7178W manual Using the D-Net, Problem, Possible Solution

Using the D-Net

Problem	Possible Solution
“Connection is failed.	This message appears when the connection speed of
1394 network speed is not	the connected device and the device selected from the
compatible.” message appears.	Target List are different when copying data.
	➔ Connect a low speed device between the two
		devices. (See figure)
			S400	S200		S100
	D-Net DTV		GROUP	GROUP	GROUP
	S400		DEVICE	DEVICE	DEVICE

IEEE1394	IEEE1394	IEEE1394
cable	cable	cable
S200		S200	S400
DEVICE		DEVICE IEEE1394	DEVICE
		cable
IEEE1394		IEEE1394
cable		cable
	S400
IEEE1394	DEVICE
cable
D-Net DTV		D-Net DTV
S400		S400

A 1394 device has a maximum connection speed which will be marked near the IEEE 1394 connector with an “S” number

(i.e., S100,S200,S400). The higher the number, the faster the maximum connection speed.

This TV has a maximum connection speed of S400.

“This device is occupied by another	This message appears when you try to record a
device.” message appears.	device, which is currently being recorded manually or
	by another device, through the TV.
	➔ Stop the recording device and retry.
“Authentication is failed” message	Check that the connected device supports DTCP.
appears.
“Recording is prevented.” message	This message appears when trying to copy protected
appears.	content.
Although DV Camcorder is in	Although a camcorder which supports the DV format
the device list, no picture is	appears in the device list, you cannot watch video
displayed on the screen when	from the camcorder even if you select the camcorder
the DV camcorder is selected.	as an input source, because the TV supports the
	MPEG format only.
	Continued...

English - 124