Samsung HP-P5071 manual Storing Channels in Memory Automatic Method

Storing Channels in Memory (Automatic Method)

First, select the correct signal source (Air, STD, HRC

1 and IRC). See steps on previous page.

Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Auto Program”,

2 then press the ENTER button.

➤Quick way to access the Automatic Channel Setting: Just press the “AUTO PROG.” button on the remote control.

TV		Channel
	Air/CATV	: Air	√
	Auto Program		√
	Add/Delete		√
	Fine Tune		√
	LNA	: On	√
	Scan		√
	Move	Enter	Return
TV		Channel
	Air/CATV	: Air	√
	Auto Program		√
	Add/Delete		√
	Fine Tune		√
	LNA	: On	√
	Scan		√
	Move	Enter	Return

Press the ENTER button.

3 The PDP will begin memorizing all of the available channels.

After all the available channels are stored, the Auto pro gram menu reappears.

Press the ENTER button to stop.

4 Press the MENU button to exit.

Note

Auto Program

Start

Enter Return

•The PDP automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

34