Samsung HT-C9930/XEE, HT-C9930/XEN manual Speaker Setting, Audio, Level, Distance, Test Tone

Setup

Audio

Speaker Setting

Settings	Speaker Setting
Display	Level
Audio	Distance
System	Test tone	:	Off
Network
Language
Security
General
Support	sSelect		rReturn

Level

You can adjust the balance and level for each speaker.

Adjusting Front/Centre/Subwoofer Speaker Level

•The volume level can be adjusted in steps from +6dB to -6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Settings	Level
Display	Front L	: ◄	0 dB
Audio	Front R	:	0 dB
	Center	:	0 dB
System
	Subwoofer	:	0 dB
Network	Test Tone	:	Off

Language

Security

General

SupportsSelect <Change rReturn

Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre and subwoofer speakers.

•You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).

Settings	Distance
Display	Front L	:	◄ 10 ft (3.0m)
Audio	Front R	:	10 ft (3.0m)
	Center	:	10 ft (3.0m)
System
	Subwoofer	:	10 ft (3.0m)
Network	Test Tone	:	Off
Language
Security
General
Support	<Change sSelect rReturn

Test Tone

Use the Test Tone feature to check the speaker connections.

Press the ◄, ► buttons to select All.

• A test tone will be sent to Front L Center Front R Subwoofer in order so you can make sure the speakers are set up correctly.

To stop the test tone, press the ◄, ► buttons to select Off.

Settings	Speaker Setting
Display	Level
Audio	Distance
System	Test Tone	: ◄	All
Network
Language
Security
General
Support	<Change		rReturn

✎NOTE

When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is not available.

38 English

HT-C9930_ELS_0914.indd 38 2010-09-14 ￿￿ 6:52:52