Apple 640 manual AppleShare Print Server, Setting preferences in the PC Print Spooler

IMPORTANT If you try to print a file using a PostScript printer driver for a non-PostScript printer, and the preferences are set to Epson, your file will not be printed. Instead, the file will be moved to a folder called “Spooler Rejected” in the Mac OS. To print the file, choose the proper printer driver in the PC environment and try again.

Note: Data sent to the LPT1 port is automatically routed to the printer selected in the Chooser in the Mac OS. There is no actual parallel port on the DOS-compatible Macintosh.

AppleShare Print Server

Do not install the AppleShare Print Server software in your DOS-compatible Macintosh, because this software causes conflicts with the PC Print Spooler. You can, however, connect your DOS-compatible Macintosh to a network that uses an AppleShare Print Server.

Setting preferences in the PC Print Spooler

You can set preferences in the PC Print Spooler to control a variety of print functions.

To choose your Print Spooler settings, follow these steps:

1In the Macintosh environment, open the Extensions folder inside the System Folder.

2Open the PC Print Spooler icon.

Operating in the PC Environment 59