Apple 640 manual Installing a Simm, Handle the Simm by its edges. Avoid touching the connectors

Installing a SIMM

1Remove the SIMM from its static-proof bag.

Handle the SIMM by its edges. Avoid touching the connectors.

2Insert the SIMM into the SIMM slot on the DOS-compatibility card assembly, as shown in the illustration. (Your SIMM may have components on one or both sides, as shown.)

Insert the SIMM into the SIMM slot. (Insert the SIMM at a slight angle.)

The SIMM fits into the slot only one way.

Make sure the notch on the SIMM is on this side.

Connectors

SIMM slot Vertical plate

144 Appendix B