Apple 640 manual Removing a Simm, Use your fingernails

Removing a SIMM

If your computer has a SIMM already installed on the DOS-compatibility card, follow these steps to remove it.

1Pull the metal clips at either end of the SIMM away from the SIMM.

Use your fingernails.

To release the SIMM, move the metal clip on each side away from the SIMM.

Rotate the SIMM away from its vertical position to disengage it from the SIMM slot.

SIMM slot Vertical plate

2 Rotate the SIMM until it is at a slight angle.

142 Appendix B