![](/images/new-backgrounds/1243185/243185119x1.webp)
Basic Functions
✎NOTE
The indication is the charging state of the built- in battery in iPod main Dock.
Check the charging state of iPod/iPhone by checking the charging indication of its battery.
!CAUTION
The Wireless Transmitter can be only charghed by the supplied adaptor.
iPod/iPhone models that can be used with this product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 3GS
iPhone 3G
iPhone
✎NOTE
“Made for iPod” means
that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
The volume control may not be operated normally except at the referred models. If there is any error happened at the models above, please update the software of iPod/iPhone at the lastest version.
How to Link the Wireless Transmitter
with the Main Unit
1.With the product turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the Subwoofer.
•Hold the TX card so that the label "WIRELESS" faces leftward and insert the card into the port.
•The TX card enables communication between the product and the Wireless Transmitter.
TX card
2.Turn off your Home Cinema.
3.Press the 4, 7, 6, 3 buttons on the remote control in order.
•The Power LED will blink once.
4.Connect the iPod/iPhone to the Wireless transmitter.
L
INK
STANDBY
CHARGE
5.Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter will blink fast.