Wireless Network
You can connect to the network with a Wireless IP sharer.1.A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
2.Set the network options. (See page 32)
Connections 02
PC
Networking with PC for AllShare function (See page 62)✎NOTE
| COMPONENT OUT | |
LAN |
|
|
WIRELESS LAN | AUX IN | VIDEO OUT |
5V 350mA |
|
|
This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN).
-The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1)Authentication Mode : WEP, WPAPSK, WPA2PSK2)Encryption Type : WEP, AESFor the AllShare function, a PC must be connected in the network as shown in the figure.
Connecting the FM Antenna
FM ANT
HDMI OUT
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
✎NOTE
This product does not receive AM broadcasts.EO OUT
English 23