![](/images/new-backgrounds/1275749/27574979x1.webp)
Setup
To enter the Network settings into your product, follow these steps:
1.Press the ▲▼ buttons to select Wired, and then press the ENTER button.
2.Press the ◄► buttons to select IP Settings, and then press the ENTER button.
Settings
Display |
|
| IP Settings |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Audio |
| IP Mode |
|
|
| Manual |
|
|
|
| ||
Network |
| IP Address |
| 0 | . | 0 | . | 0 | . | 0 |
|
|
System |
| Subnet Mask |
|
| . |
| . |
| . |
|
|
|
|
| 0 | 0 | 0 | 0 |
|
| |||||
|
|
|
|
|
|
|
| |||||
Language |
| Gateway |
| 0 | . | 0 | . | 0 | . | 0 |
|
|
Security |
| DNS Mode |
|
|
| Manual |
|
|
|
| ||
| DNS Server |
| 0 | . | 0 | . | 0 | . | 0 |
|
| |
General |
|
|
|
|
|
|
|
|
|
|
|
|
Wireless Network
You can setup a wireless network three ways:
•Wireless (General)
•Using WPS(PBC).
•One Foot Connection
Wireless (General) includes both Automatic and Manual setup procedures.
Setting Up the Wireless Network Connection - Auto
Most wireless networks have an optional security system that requires devices that access the
Support
OK
m Move Number " Enter ' Return
network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified
3. | Press the ENTER button to select IP Mode. |
4. | Press the ▲▼ buttons to select Manual, |
| and then press the ENTER button. |
5. | Press the ▼ button to go to the first entry |
| field (IP Address). |
6. | Use the number buttons on your remote to |
| enter numbers. |
7. | When done with each field, press the ► |
| button to move successively to the next field. |
| You can also use the other arrow buttons to |
| move up, down, and back. |
length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the Auto setup process.
1.Press the ▲▼ buttons to select Wireless (General).
Settings
Network Settings
Display
Select a network connection type.
8. Enter the IP Address, Subnet Mask, and |
Audio
Network
System
Wired
| Gateway values. |
9. | Press the ▼ button to go to DNS Mode. |
10. | Press the ▼ button to go to the first DNS |
| entry field. Enter the numbers as above. |
11. | Press the ENTER button to select OK. |
| The Network Status screen appears. The |
| product connects to the network after the |
| network connection is verified. |
Wireless
Language(General)
Set up wireless network by selecting your Wireless
Security WPS(PBC) Router. You may need to enter security key depending on the setting of the Wireless Router.
General One Foot
Support Connection
> Move " Enter ' Return
2.Press the ENTER button.
When done, it displays a list of the available networks.
3.Press the ▲▼ buttons to select the desired network, and then press the ENTER button. The Security screen appears.