Samsung HT-P70NR/ELS, HT-P70R/ELS manual Setting the Test Tone

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1	In	Stop or no disc	2	Press Cursor	3	Press Cursor button
				button to move to		to move to ‘TEST
	mode, press
				‘Audio’ and then		TONE’ and then press
	MENU button.
				press ENTER button.		ENTER button.

• The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in order.

If the ENTER button is pressed again at this time, the test tone will stop.

Setting the DRC (Dynamic Range Compression) GB

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

1	In	Stop mode,	2	Press Cursor
				button to move to
	press MENU			‘Audio’ and then
	button.			press ENTER
				button.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote.

Press Cursor 3 button to move to ‘DRC’ and then press ENTER

button.

4 Press Cursor , to adjust the ‘DRC’.

•When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.

SETUP

Press TEST TONE button.

•Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

•Use this function to check that each speaker is correctly connected and that there is no problem.

To end the test tone,

press TEST TONE button again.

L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
R: Front Speaker (R)	SL: Rear Speaker (L)	SR: Rear Speaker (R)

Multi-Channel Pro Logic Mode

Start

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

51 52