Chapter 7. Appendix
Preventing afterimage burn-in
The best way to protect the product from afterimage
89
‒‒ Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes.
off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide.
• Powering Off, Screen Saver and Power Saving Mode |
‒‒ Power off the product for 2 hours after using it for12 hours. |
‒‒ Go to Display Properties > Power Supply on your PC and set the product to power |
off as required. |
‒‒ Using a screen saver is recommended. |
It is best to use a |
OZ348 : 20:30
FLIGHT : TIMEOZ348 : 20:30
OZ348 : 20:30
FLIGHT : TIME
OZ348 : 20:30
• Regular color change |
‒‒ Use 2 colors. |
Switch between 2 colors every 30 minutes as shown above. |
Type 1 | Type 2 |
‒‒ Move and change text every 30 minutes as shown below.
FLIGHT : TIME
OZ348 : 20:30
FLIGHT | TIME |
OZ348 | 20:30 |
UA102 | 21:10 |
| FLIGHT |
| TIME |
|
|
|
|
|
|
| OZ348 |
| 20:30 |
|
|
|
|
|
|
| UA102 |
| 21:10 |
|
|
|
|
|
|
Step 1 | Step 2 |
FLIGHT : TIME
•Avoid combinations of a text color and background color of contrasting brightness.
(Brightness: refers to the lightness or darkness of a color which varies depending on the amount of light emitted.)
•Avoid using grey as it may contribute to afterimage
•Avoid using colors of contrasting brightness (black and white; grey).
FLIGHT | : | TIME | FLIGHT | : | TIME |
OZ348 | : | 20:30 | OZ348 | : | 20:30 |
OZ348 : 20:30
Step 3
‒‒ Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
• Regular Text color Change