Introduction
-You can only hear sound from this monitor model if it is connected to a PC via a USB cable.
Use this button to decrease the screen brightness for the 7" USB monitor. The LED blinks when the screen brightness is decreased to the minimum or when a screen brightness adjustment is completed.
Use this button to increase the screen brightness for the 7" USB monitor. The LED blinks when the screen brightness is increased to the maximum or when a screen brightness adjustment is completed.
Power button [
] / Power indicator
Press the Power button to turn the 7" USB monitor on or off. The Power indicator is displayed in blue when operating normally.
•Please activate the afterimage prevention function before using the 7" USB auxiliary monitor.
•Activating the function
Turn off the USB monitor and hold down the Power button for five (5) seconds. The monitor is turned on again and the afterimage prevention program is ac- tivated while the LED blinks twice.
•Deactivating the function
Turn off the USB monitor and hold down the Power button for five (5) seconds. The monitor is turned on again and the afterimage prevention program is de- activated while the LED blinks once.
•What is the afterimage prevention function?
If you use the USB auxiliary monitor with the same image remaining on the screen for a long period of time, an afterimage may develop on the panel. The afterimage prevention function reduces afterimages on the panel by turning the USB auxiliary monitor on and off automatically for a short time (about 0.1 seconds) every thirty (30) minutes.
Rear
Note
The configuration at the back of the monitor may vary from product to product.