Using the Software

Note

This monitor must be connected with a D-Sub (Analog) or a DVI-D cable (Digital) when used as a normal monitor. USB cables are used when connecting other devices.

2.For some media players, when a USB device is being recognized again while a media player is running, you have to close and run it again to operate the sound and camera devices normally.

3.For some PCs, your PC may not boot up with the monitor recognized even if the USB cable is connected, depending on the PC BIOS version. Check whether the BIOS on your PC has been updated to the latest version.

4.Sometimes, if the initial volume setting is low the sound may be very low due to the characteristics of USB Audio devices. (This may differ according to the operating system.) In this case, adjust the Master Volume of the PC to an appropriate level.

5.This monitor supports Windows XP Service Pack 2 or later only.

Note

Service Pack 1 or earlier is not supported.

This monitor is designed for optimal performance using Windows XP Service Pack 2 and USB 2.0.

6.The monitor may not operate normally with versions older than USB 2.0.

7.If more than one monitor of this type of model is connected, the USB device recognized for each monitor may not operate normally.

8.Noise may occur from the MIC and speaker if this monitor is placed too near.

Web Cam Companion 2

Digital video cameras have become common in households today. As a result, a plethora of software has been made available for users to edit and create home movies. Forgotten in the mix is the widely popular webcam, used for a variety of purposes ranging from simple video creation to online video chats. To complement webcam's small but versatile functionalities, ArcSoft Web Cam Companion 2™ offers a broad range of functions designed and optimized for webcam use. Whether utilized to launch a video chat client or automatically record movement detected by the device, Web Cam Companion 2 can do it all!

-You can only hear sound from this monitor model if it is connected to a PC via a USB cable.

•System Requirements Windows XP/ Vista

PIII 800 MHz or equivalent (PIV 2.0 GHz or higher recommended)

100 MB free hard drive space for program installation

256 MB RAM (512 MB DDR RAM recommended)

16-bit color display at 800x600 (32 MB video memory with DirectX 3D support recommended) DirectX 8.1 or higher (DirectX 9.0c recommended)