Adjusting the Monitor

You can change the size of the screen displayed on your monitor.

Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals.

Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.

Note

Signals not available in the standard mode table are not supported.

If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed.

MENU → , , , → MENU

HDMI/DVI Mode

You can change the size of the screen displayed on your monitor.

4 : 3 - Sets the picture to 4:3 normal mode.

Wide - Enlarges the aspect ratio of the picture to fit the entire screen.

Just Scan - Use the function to see the full image without any cutoff when HDMI/DVI (720p/ 1080i/1080p) signals are input.

Note

It can only be selected if an external input is connected to the HDMI terminal and the 'AV Mode' is set to 'On'.

Signals not available in the standard mode table are not supported.

If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed.

MENU → , , , → MENU