Using the Software

9.Click the "Finish" button. The installation of the Media-Impression is completed.

Note

For more information on how to use the program, refer to its “Help” section.

Installing the 7” USB Monitor Driver

•System Requirements CPU : 1.73GHz or Later

OS : Windows XP Service Pack2 or later. However, Windows Vista 64bit is not supported.

RAM : 512 MB RAM or more

USB : 1.1 or higher (USB 2.0 recommended)

Installing Your USB Monitor

•Make sure to connect the USB cable and begin the installation after your PC has booted.

•The Setup program requires about one minute for the installation. If you turn the power off or remove the USB cable while the Setup program is running, it may cause an error with the PC or the Windows operating system.