Basic Features

<For Analogue TV models>

•• Manual tuning

Scans for a analogue channel.

1.Select the New.

2.Set the Programme, Colour System, Sound System, Channel and Search.

3.Select the Store. When scanning has finished, a channel is updated in the channel list. Channel mode

•• P (programme mode)

When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

•• C (aerial channel mode) / S (cable channel mode)

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Fine Tune

Menu → Broadcasting → Channel Settings → Fine Tune (analogue channels only)

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.

✎✎Select the channel, and then select Fine Tune.

✎✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

✎✎To reset fine-tuning, select the channel, select Fine Tune, and then select Reset on the Fine Tune screen.

English - 45