6Setup and Reset
6.6DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
If the monitor (when set to HDMI, DisplayPort, Mini DP(U24E850R) or HDMI 1, HDMI 2, DisplayPort, Mini DP(U28E850R / U32E850R)) is in power saving mode or is displaying the message Check Signal Cable, press the [] button to display the On Screen Display (OSD). You can select 1.1 or 1.2.
If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the limitations in HBR1 transmission speeds.
6.6.1 Configuring DisplayPort Ver.
1Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
2Press [ ] to move to System and press [] on the product.
3Press [ ] to move to DisplayPort Ver. and press [] on the product. The following screen will appear.
|
|
| System |
|
|
| Select your | |
|
|
|
| FreeSync |
| Off | Displayport. | |
|
|
|
|
| Displayport 1.1 | |||
|
|
|
| Smart Eco Saving |
| Off | supports HBR 1, | |
|
|
|
|
| while 1.2 supports | |||
|
|
|
| Off Timer Plus |
|
|
| HBR 2. |
|
|
|
|
|
|
|
| |
|
|
|
| USB Super Charging |
|
|
|
|
|
|
|
| PC/AV Mode |
|
|
|
|
|
|
|
| 1.1 |
|
| ||
|
|
|
| DisplayPort Ver. |
|
| ||
|
|
|
|
| 1.2 |
|
| |
|
|
|
| Source Detection |
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.1 / 1.2
4Press [ ] to move to the option you want and press [ ].
5The selected option will be applied.
6 Setup and Reset 92