QDuring the wireless Ad-Hoc network operation, the AP (Access Point) is intermittently not found.

AThis problem occurs intermittently during the wireless Ad-Hoc network operation. Even if this problem occurs, the wireless Ad-Hoc network operation is working properly and is not affected. Click Refresh to update the AP list.

QI have set the same IP address for both the wireless and wired connections, but they do not work properly.

AYou cannot use wireless and wired connections using the same IP address. To sequentially use both the wired and wireless connections with the same IP address, you need to set the currently not needed connection to Do Not Use in the Network Connections of the Control Panel.

QThe wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product.

A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used. If you experience channel interference from other equipment, we recommended changing the channel for connecting to the AP. For more information about AP settings, refer to the User Manual supplied by the AP manufacturer.

A2 Since IEEE802.11g equipment operates in hybrid mode when there is active IEEE802.11b equipment, the data rate may be degraded.

123

Page 123
Image 123
Samsung NP-R470-FS05RU, NP-R470-AS01SG, NP-R470-FS01RU, NP-R470-FS04RU, NP-R470-FS02RU, NP-R470-FS03RU manual 123