Initial setup

Initial cleaning

Before the oven is used for the first time, it should be cleaned thoroughly. Do not use any abrasive cleaning agents, cloths or substances, because they could damage the oven surfaces.

Use warm water, detergent and soft clean cloth to clean the baking tray, dripping tray, grids and the other accessories, as well as the internal compartment and the guide rails at the oven sides. The front should be cleaned with damp, soft and clean cloth.

Check if the oven clock is set correctly and remove all accessories from the oven. Run oven in single mode with convection for one hour at 200 °C. This procedure will burn any remaining production substances in the oven with an unmistakeable odour. This is normal, though make sure your kitchen is well ventilated during that time.

Troubleshooting

PROBLEM

SOLUTION

What should I do if the oven

The oven may not be switched on. Switch the oven on.

doesn’t heat up?

The clock may not be set. Set the clock.

 

Check to see if the required settings have been applied.

 

A household fuse may have blown or a circuit breaker

 

may has tripped. Replace the fuses or reset the circuit. If

 

this happens repeatedly, call an electrician.

What should I do if the oven

There may be problems with the internal electrical

doesn’t heat up even after the

connections. Call your local service centre.

function and temperature have

 

been set?

 

 

 

What should I do if an error

There is a fault in the internal electrical circuit connection.

code appears and the oven

Call your local service centre.

does not heat up?

 

 

 

What should I do if the time

There has been a power failure. Set the clock.

display is blinking?

 

What should I do if the oven

The oven light is faulty. Call your local service centre.

light doesn’t illuminate?

 

What should I do if the oven’s

After use, the oven’s fan runs until the oven has cooled

fan is running without having

down. Call your local service centre if the fan continues

been set?

to run after the oven has cooled down.

Information codes

 

CODE

PROBLEM

SOLUTION

 

 

 

Safety shut off. The oven continues

Turn oven off and remove food. Allow oven

 

 

 

 

 

 

operating at the set temperature for a

to cool before using it again.

 

 

 

prolonged time.

 

 

 

 

 

 

 

 

 

Key is pressed for over 10 seconds.

Call your local SAMSUNG Customer Care

 

 

 

 

 

 

 

Centre.

 

 

 

 

 

 

 

 

 

 

 

An oven error may cause low

Call your local SAMSUNG Customer Care

 

1)

 

 

**

 

performance and problems in safety.

Centre.

 

 

 

 

 

Stop using the oven immediately.

 

1) ** refers to all numbers.

installation & maintenance_15

ecna ainstntenm &allation

NV6323BGSSR_EO_DG68-00191L_EN.indd 15

2012-02-20 �� 4:57:08

Page 95
Image 95
Samsung NV6323BGSSR/EO Initial setup, Troubleshooting, Information codes, Initial cleaning, Installation & maintenance15