Samsung NX583G0VB user manual More steam is visible when using

	PROBLEM		POSSIBLE CAUSE			SOLUTION
Steam or smoke coming		This is normal.		The oven vent is located there.
from under the control				More steam is visible when using
panel.				the convection functions or
				when baking or roasting multiple
				items at the same time.
Burning or oily odor		This is normal for a new oven		To speed the process, set a self-
emitting from the vent.		and will disappear within 1/2		cleaning cycle for a minimum of
		hour of the first bake cycle.		3 hours. (See pages 68 and 69.)
Strong odor.		This is temporary.		The insulation around the inside
				of the oven emits an odor the
				first few times the oven is used.
Oven racks are difficult				Apply a small amount of
to slide.				vegetable oil to a paper towel
				and wipe edges of the oven
				racks with the paper towel.
				Racks become dull and hard to
				slide when they are left in the
				oven during a self-clean cycle.
Fan noise.		This is normal.		The convection fan runs until the
				function is over or the door is
				opened.
Convection fan is not				The fan starts automatically
working.				when the oven meets the
				preheat temperature.
Warming drawer		The controls are not set properly.		Reset the controls as described
will not work (Model				on page 52 and 53.
FX710BGS).
		The Self-Clean or Sabbath		The warming drawer will not
		function is being used.		operate during either of these
				operations. Try again after the
				function is completed or cancelled.
		The oven controls have been		Unlock the controls and try
		locked.		again.
		There is a blown fuse or tripped		Replace blown fuse or reset
		circuit breaker.		tripped circuit breaker.
Excessive condensation		The temperature setting is too		See page 53.
in the warming drawer		high.
(Model FX710BGS).
		The foods being warmed are not		Cover foods with a lid or
		covered with a lid or aluminum foil.		aluminum foil.
		You are trying to warm liquids.		Liquid should not be warmed in
				the drawer. Remove liquids.
Warming drawer or		The drawer is not properly		Remove and replace the drawer.
storage drawer does not		aligned with the full-extension		(See page 64.)
slide smoothly or drags.		roller guide rails or nylon drawer
		guides.
		The contents in the drawer are		Reduce the weight and/or
		too heavy.		redistribute the contents in the
				drawer.
					troubleshooting _75

ng ootiesh bl rout

121106_(IB)FX710BGS,FX510BGS,NX583G0VB_DG68-00356A-08_EN.indd 75 13/01/2014 13:45:27