Setting up your Refrigerator
Setting up your Refrigerator
Spacer
Spacer
<Back>
Flooring
Remove paper on spacer and then attach a spacer (Gray block) on the back side of refrigerator for better performance. Make sure a spacer fix like above image when you install the refrigerator. It is improving the refrigerator performance.
If You set the refrigerator in furniture, the spacer should be removed for the
For proper installation, this refrigerator must be placed on a level surface of hard material that has the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator. To protect the floor finish, cut a large section of the cardboard carton and place it under the refrigerator where you are working.
• Pulling or pushing the refrigerator may damage the floor.
Moving the refrigerator after installation may damage the floor.
Levelling the refrigerator
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
When installing the refrigerator, make sure both legs contact the floor for secure installation.
|
|
| Case 1) The appliance tilts down to the left. |
|
|
| Turn the left adjusting leg in the direction |
| < Case 1 > | < Case 2 > | of the arrow until the appliance is level. |
| Case 2) The appliance tilts down to the | ||
|
|
| |
|
|
| right. Turn the right adjusting leg in the |
|
|
| direction of the arrow until the appliance |
|
|
| is level. |
20 | English |
|
|
2017. 9. 12. �� 10:08 |
