To save electricity, the Panel Display turns off automatically under the following conditions: When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed. However, the icon indicating your cubed or crushed ice selection, or sparkling water selection, will stay on. When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again. All function keys will become operational after you remove your finger from the button you pressed.
( 10 ) | Water filter usage |
Filter | This icon lights up when you need |
| to change the filter, usually after the |
| refrigerator has dispensed about 300 |
| gallons of water (after about 6 months). |
| The icon will blink red for several seconds |
| when you open or close the door. |
| After you install the new water filter, reset |
| the filter indicator by touching and holding |
| the Hold 3sec for Filter Reset button for |
| 3 seconds. |
To reduce the risk of water damage WARNINGto your property DO NOT use generic
brands of water filters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG is not legally responsible for any damage, including, but not limited to, property
damage caused by water leakage
from the use of a generic water filter. (Red) SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filters.
The Filter light turns red to let you know when it is time to change your water filter cartridge.
To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.
To change the water filter, follow these steps:
1.Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn,
| 2 |
|
| 1 | operating02 |
| • To change the water filter more easily, | |
2. | Pull the water filter ( 1 ) from the case filter ( 2 ). |
|
shut off the water supply valve.
•Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.
•When you pull the water filter, a little water can leak from the opening. This is normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it.
•To prevent overflow,
empty the water | 2 |
filter tray ( 3 ) and
dry around the filter | 3 |
| |
case ( 2 ). |
|
3.Insert the new filter into the filter case ( 4 ).
4.Push the filter, and then turn it clockwise until it locks.
•If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.
•The locked symbol should be lined up with the indicator line.
4
5.Touch the “Alarm/hold 3 sec for Filter Reset”
button ( (Filter Reset) ) for about 3 seconds to reset
the water filter. The color of
the indicator ( 
) changes from red to off.
6.If you turned off the water supply, turn it back on.
operating _25
2016. 3. 24. �� 8:20 |